Welcome to SCA structure

Selection and use skills of big outdoor party tent

Selection and use skills of big outdoor party tent



Big outdoor party tent is important equipment for camping, but it is not the only equipment. Its role in camping is limited. Generally speaking, big outdoor party tent does not promise to keep warm. Keeping warm in camping is the task of sleeping bags. The main functions of big outdoor party tent are wind, rain, dust, dew, and moisture proof. Provide a relatively comfortable resting environment for campers. According to the above goals, the following factors should be considered when choosing big outdoor party tent:
 
1. Choose a foreign account to strive for high waterproofness. You can blow the fabric with your mouth to test its breathability. Generally speaking, if the breathability is poor, the waterproofness will be good.
2. Choose the inner tent and strive for good air permeability.
3. The choice of struts requires high strength and good resilience.
4. The choice of primer should pay attention to water resistance and wear resistance.
5. The big outdoor party tentzui for camping is better to choose the double-layer structure.
6. The best choice of specifications is with a shed, or consider a larger size.
 
7. Choosing a big outdoor party tent with front and rear double doors is more conducive to ventilation.
 
Although the use of big outdoor party tent is not complicated, it should be said that it is also a science. The same big outdoor party tent is used properly, windproof and rainproof effect is good, and vice versa is not ideal. Three aspects should be paid attention to when using big outdoor party tent:
 
1. Selection of Peng Site
 
The support of the big outdoor party tent should be located in a relatively flat area. The entrance and exit should be facing away from the air outlet, and the ground should be relatively dry. If there is a thin lawn, it is best. If the ground has a slight slope, the exit should be selected at a downslope to facilitate ditching and drainage. .
 
2. Support and fixation
 
After the big outdoor party tent is rolled out, the four corners of the tent should be fixed first, so that the bottom of the big outdoor party tent is laid down firmly on the ground. If possible, a mat can be placed under the big outdoor party tent to protect the bottom of the big outdoor party tent. , Can also achieve the best waterproof effect. When supporting the external account, in addition to the reliable connection with the tent pole, special attention should be paid to stretching the external tent to make the external tent tight so as to achieve the best rain resistance. For the big outdoor party tent with skirt, use SARS or The soft pressure is good, and snow pressure can also be used in winter, which is more conducive to prevention.
 
An inclination angle of the ground nail is 40 degrees, and the distance and direction of the ground nail into the ground should be on the same axis as the force. The rope and the ground nail form a 90-degree angle, which is conducive to achieving the maximum strength. Pay attention to the corresponding fixation in the fixed sequence, such as: the left front corner, the right rear corner, the right front corner, and the left rear corner in turn. After fixing the big outdoor party tent, adjust the rope pull line to make all aspects of the pulling force consistent. After supporting the big outdoor party tent, check the distance between the inner tents. If they are stuck together, it will affect the rain and dew protection, and should be adjusted.
 
3. Dig drainage ditch
 
When camping, if it rains, the procedure of digging the drainage ditch must not be omitted. The drainage ditch should be close to the outer edge of the big outdoor party tent. If there is no big outdoor party tent with a skirt, the location of the ditch should be convenient for the water flowing from the tent. It is advisable to enter the ditch, and the drainage ditch is dug around the big outdoor party tent so that the stagnant water can be discharged smoothly.

Get In Touch